SHAKEN VERSUS STIRRED
Shaken not stirred, as they say. Although this line was made famous entirely by Ian Fleming’s iconic British character James Bond, it’s often misunderstood and has led to quite a bit of confusion in the world of mixology. For example, even though Bond ordered his martini shaken, that’s actually not considered best practice by the vast majority of bartenders.
The proper rule of thumb is that liquor-forward drinks (drinks intended to feature the flavor of any particular liquor rather than masking or mixing them) should always be stirred because that provides a smoother, more unadulterated drinking experience. While any drinks with fruit juices, cream, egg, or any other mixer, should be shaken. Shaking a drink allows a consistent flavor throughout so that one sip doesn’t entirely feature a fruity flavor while the next can smack someone in the face with overwhelming vodka or rum flavor.
Stir
- stirred not shaken
- Stirring is harder than shaking!!!!!
- stir for 30-45 seconds with any wet, proportionate, tempered, and clear ice in a chilled glass
- bruising - destroying botanical notes of gin
- maintain delicate flavors of spirit
- if not, aka normal ice , then stir for even less
- STIR FOR MAINLY LIQUOR flavors
- SHAKE IF NEED TO INCORPORATE CITRUSES AND SWEETENERS
- Spoon should only face inwards as you stir around glass
Shaking
- to make a drink cohesive
- did you add lemon or dairy? If so, yes
- = more dilution and more cohesive
Cheapest ingredients first
- for chilling and diluting and aerating
- aeration keeps drink light and
Add liquor before ice
- add ice all the way to the top w other part of shaker
- we dont want ice to break, so use large ice cubes
- if u don’t want excessive dilution
- Hit it for the one time to seal and flip ice by sort of flicking it w finesse
- you want to flip the ice, circulate cold to chill the drink
- one hand constant, one helps flip
- Continue until you hear ice chip and break
- Strain as you Pour
- take off cap and stack
- add strainer on top
Add any carbonated drinks after
To “Rim” a Glass w Salt
- Rub edge of glass w lemon and stamp into salt
- or use simple syrup and do same
Key In Shaking is not to aerate the silkiness of elixir
Shaking with Egg Whites
Egg Whitez
best method is to just put the egg white and ice in at the same time and go to town. The contraction from the ice cancels out the pressure increase from the egg whites foaming. Any tiny aesthetic improvement you might get on foam (and we don't agree there even is an improvement) from using a dry shake or reverse dry shake is outweighed by the added trouble of shaking twice and risking a foamy leak.
How much ice in shaker?
- doesn’t matter, we just want big ones to make it cold and add a lil water
Bullet shaking
- which is shaking more horizontally to break ice when in rush, done in bars
HOW TO TOP OFF A DRINK
If you’ve got any experience with creating cocktails, you know that it’s possible to assemble all the ingredients, mix the drink itself, and pour it into a glass without having any idea how much of the finished product you have. If you’re looking to fill a glass completely, here are some different ways you can top off a drink to make sure it’s being presented properly:
- Topping a drink off with more liquor: Because most cocktails are created to feature one type of liquor or another, adding an extra splash at the top of a drink doesn’t necessarily hurt. Just be careful to make sure you’re not overpowering the flavor, and if you’ve created a mixed drink, you may want to mix it again just to make sure it tastes right. If you’re adding a splash to a stirred drink, one more spin with a bar spoon won’t hurt.
- Adding a garnish: The infamous “cherry on top.” This technique involves adding perceived volume without actually changing any of the proportions of the drink. By putting something like a lemon wedge, a cherry, or a few mint leaves into the drink, you’re raising the liquid level without changing the recipe.
- Adding more ice: Depending on the drink, you may want to just add a bit more ice to raise the level of the glass. Just be careful to not dilute the drink. Use the right kind of ice, and reserve this technique for drinks that actually rely on dilution, like the Moscow Mule.
HOW TO BUILD A DRINK
Building a drink is the technique by which cocktail ingredients are poured directly into the serving glass rather than into a cocktail shaker. While there is no right and wrong way to order ingredients, you will need to experiment with every cocktail you make to see if building it a certain way affects flavor at all. Here are some tips for making sure you’re building all your cocktails the best way:
- rub lemon on rims of glasses
- Measure twice, pour once: While this may sound stupid at first glance, it’s worth keeping in mind. No, you don’t actually have to measure your ingredients, pour them out, then measure them again, but it’s always a good idea to verify that you’re measuring the right amount before you add them to a cocktail. This way, you’ll never have to start again because you accidentally added two shots when you only needed one.
- WE WANT A PERFECT MENISCUS on jigger
- that is perfect time to pour
- Order matters: With some drinks, the order can really have an impact on the flavor profile. For example, some sweeteners need to be poured into the drink last because the temperature of the other ingredients can have a huge impact on how everything mixes in the glass.
- in cocktail shaker
- ice last in shaker
- liquids first
- Ice first in glass: Always make sure that if you’re building a cocktail, you experiment with whether or not you should create the drink by adding the ice to the glass before pouring the ingredients or after. The majority of drinks should be built upon the ice already in the glass, but it may vary. Feel free to try it out for yourself to see what tastes best!
- grab ice w other part of shaker not hands lol
- 170 g of ice to be exactly perfect
- Premeasure out lemon or lime juice for the night
- shake 12-15 seconds
HOW TO STRAIN A DRINK
If you’re making a drink with several ingredients, but you don’t want all the bits and pieces of those ingredients in the finished product, you’ll want to make sure you strain the drink before it gets served. Straining a cocktail removes any unwanted items such as muddled herbs, pieces of fruit, or even ice from certain drinks. Here are some things to keep in mind next time you strain a mixed drink:
- Use a cocktail strainer: If you’ve made a drink with a cocktail shaker, chances are you’ve got a strainer built-in. Hold the strainer lid on top of the cocktail shaker with your forefinger and middle finger, then tip the shaker upside down to pour the drink out into a glass.
- Use a traditional strainer: If you’re using a traditional strainer, sometimes called a Julep strainer, you should position the strainer directly over the glass and then pour the cocktail through the strainer onto the ice.
In Straining
- finesse by pouring up high, squeezing lemon with the flow as it goes down into glass
- strainer and glass in right hand, citrus on left
Pics
HOW TO BLEND A DRINK
Mastering the proper blending technique when you’re making cocktails is an important step. Although not every cocktail needs to be blended, here are some steps you should take to make sure that you’re blending your drinks properly:
- Utilizing the right blender is key. One of the most commonly-blended drinks is the frozen margarita, and the right blender can make or break a margarita. You’ll want to get something high quality, as a blender will deteriorate over time.
- Add the ice last. Make sure the liquid ingredients are added towards the bottom of the blender, and all the ice is added in at the end.
- When you can, use crushed ice. This reduces wear on the blades and the motor of your blender, extending its lifetime.
- Start slow, and build up the speed as you go. If you’ve got a variable speed mixer, starting slow will keep the blades from jamming up and will again lengthen the lifetime of your blender.
HOW TO MUDDLE A DRINK
Muddling a drink is a technique used by bartenders where a tool called a muddler (similar to a pestle) is used to mash—or muddle—cocktail ingredients such as herbs, fruits, or spices in the bottom of the drink. Here are some tips on how to properly muddle your next cocktail: